codpac

Tube Fillling Machines

Industrial Filling Equipment

Tube Filling Machines

Machine could automatically finish tube feeding, registration mark identifying, filling, sealing with coding, end trimming, tube out feeding, fully automatic, save labor cost and lower production cost. Machine is equipped with safety protection device and overload protection. Cam indexing system could position precisely for ten working stations. Adopts ultrasonic sealing technology, no need warm up time, more stable and neat sealing, no distortion and low reject rate less than 1%. Independent R & D for digital ultrasonic automatic tracking electrical control box, no need manual adjust the frequency, with power auto compensation function, avoiding the reduction of power after long time use. Could freely adjust the power based on tube material and size, stable and minimum the fault rate, extend the life span than the normal electrical box. PLC with touch screen control system with alarm system, could directly view the alarm information on the touch screen, could locate the problem and solve immediately.

Tube Filling Machines
Technical Details

Specifications

Filling SystemPneumatic piston pump
Filling Range10–120 ml and 25–250 ml
Accuracy≤±1%
Capacity22–28 pcs/min
Tube Diameter25–50 mm
Supply3 Phase, 380 V, 50 Hz
Working Pressure0.6 MPa

Automatic Tube Filling and Sealing Equipment

Codpac FZC is a supplier of automatic packaging machines to industries concerned with products packaged through tubes. Being a tube filling and sealing machine supplier in Sharjah, we also offer machines that guarantee tube feeding, filling, sealing, marking, edge-cutting, and product discharging in an automated way.

The machine is designed to lessen the manual handling of products and to ensure accurate filling and sealing of products in tubes. Its integrated functions make it suitable for businesses seeking an efficient solution for filling and sealing compatible products.

Integrated Filling and Sealing Functions

The system performs different processes during the cycle of packaging in an automated manner from feeding the tube to getting the finished product.

  • Automatic Tube Feeding: Positions tubes for processing.
  • Registration Mark Detection: Printed registration marks are identified for placing the tube correctly.
  • Pneumatic Piston Filling: Product is dispensed into the tube in the desired filling range.
  • Ultrasonic Sealing: Seals compatible tubes without conventional heating warm-up time.
  • Coding and End Trimming: Assists in printing the code and cutting the nozzles of the sealed tubes.
  • Automatic Discharge: Transfers finished tubes out of the machine.

A cam indexing mechanism is employed for positioning tubes through ten working positions. The machine is safe and has overload protection features.

Ultrasonic Technology and Touch-Screen Controls

The ultrasonic sealing mechanism is designed to create ideal seals that minimize distortion. According to the supplied product specifications, the reject rate can be below 1% under appropriate operating conditions.

The autonomous digital ultrasonic controller continuously monitors the working frequency and compensates the power. The operators are able to adjust the power based on the tube's size and materials, providing stable sealing performance.

The PLC-based touch-screen control system displays machine alarms, allowing operators to identify reported issues and respond promptly. These features support convenient operation and monitoring during production.

Applications for Tube-Based Products

Depending on formulation properties and equipment compatibility, tube filling machinery may be used for:

  • Cosmetic creams and lotions: Compatible formulations packaged in squeeze tubes.
  • Gels and personal care products: Products requiring measured dispensing into tubes.
  • Other tube-packed formulations: Applications assessed according to viscosity, material, and filling requirements.

Confirm product compatibility, tube material, and sealing requirements before selecting the machine for a specific application.

Technical Specifications

Specification Pneumatic piston pump
Filling Range 10–120 ml or 25–250 ml
Filling Accuracy ≤ ±1%
Production Capacity 22–28 pieces/minute
Tube Diameter 25–50 mm
Power Supply Three-phase, 380 V, 50 Hz
Working Pressure 0.6 MPa
Indexing System Cam indexing, 10 working stations
Sealing Technology Ultrasonic
Control System PLC touch screen with alarm system

Performance depends on the product, tube specifications, filling volume, and operating conditions. Confirm the required filling range and configuration with the supplier.

Packaging Machinery Support from Codpac FZC

Established in Sharjah in 2012, Codpac FZC supplies filling, packaging, and coding machinery for manufacturing businesses. The company also supports its clients in selecting machinery, installing it, training operators, and giving after-sales help, following the project specifications.

Our team can discuss your production setup, product characteristics, and packaging objectives to help identify an appropriate machinery configuration. From initial project discussions to operational guidance, we aim to support businesses in establishing a packaging process suited to their facility and production needs.

Discuss Your Tube Packaging Requirements

Share your product formulation, tube dimensions, target filling volume, and expected output with Codpac FZC to discuss machine compatibility for your facility.

Contact Us

Frequently Asked Questions

It automatically fills compatible products into tubes and seals their ends. This machine also supports tube feeding, coding, trimming, and discharge.

It uses a pneumatic piston pump to dispense the product into tubes.

The listed filling ranges are 10–120 ml and 25–250 ml. Confirm the required configuration with Codpac FZC.

The stated capacity is 22–28 pieces per minute, depending on operating conditions and product characteristics.

The supplied specifications list tube diameters from 25 mm to 50 mm.

Ultrasonic sealing avoids conventional heating warm-up time and is designed to produce neat seals with minimal distortion when used with compatible tubes.

Yes. Coding is included in the described automatic operating sequence. Confirm the coding configuration for your application.

Yes. The PLC touch-screen interface displays alarm information to help operators identify reported issues.

The listed requirements are a three-phase, 380 V, 50 Hz power supply and a working pressure of 0.6 MPa.

Codpac FZC supplies filling and packaging machinery from Sharjah, UAE. Contact the team to discuss your product, tube dimensions, and equipment requirements.

Discuss Your Tube Packaging Requirements

Share your product formulation, tube dimensions, target filling volume, and expected output with Codpac FZC to discuss machine compatibility for your facility.

Visit our contact page to discuss your project.

Get in Touch with Codpac FZC